Technical Support FAQs | Phone: 888-436-7832 | Technical Support opens .

Products / Fire / Fire Control Panels

XF6 Series Fire Control Panels

Are you ready to experience the future of fire control? Look no further than the XF6, a state-of-the-art 24V control panel built for single-site applications. It comes equipped with network and optional cellular communications that send all signals directly to the monitoring center. The XF6 is both addressable and UL864 Listed for wireless. Plus, powerful testing features can be performed using Dealer Admin.

Download Spec Sheet Contact & Support

The XF6 Series comes equipped with network and optional cellular communications that send all signals directly to the monitoring center. The XF6 is both addressable and UL 864 10th Edition Listed for wireless.

  • 12/24 V Fire Solution

  • XF6-100 Fire Control Panel
  • XF6-100K Fire Control Panel - 630F on door
  • XF6-500 Fire Control Panel
  • XF6-500K Fire Control Panel - 630F on door

California State Fire Marshall (CSFM)

New York City Fire Department (FDNY COA)

Los Angeles Fire Department (LAFD)

Underwriters Laboratories Listings

  • ANSI/UL 864 - Control Units for Fire Protective Signaling Systems 10th Edition

See Compliance Note (LT-2518) and XF6 Series Compliance Guide (LT-2779).

Product Resources

Technical Documents Video Library Marketing Literature Control Panel FAQs

Firmware

Version 252 | March 13, 2025

Time Change 

This update allows the panel to receive time updates from SecureCom Wireless® Servers. This option can be enabled in panel programming on the keypad or on Dealer Admin. To receive time updates from SecureCom Wireless Servers, complete the following steps:

  1. At the keypad, enter 6653 (PROG) and select CMD to enter the programming menu.
  2. In SYSTEM OPTIONS, go to REQUEST TIME CHG and select one of the following options:
    • NO — Do not request time update
    • SCS — Request time update from the monitoring center receiver
    • SCW — Request time update from SecureCom Wireless
  3. In DST, select YES to observe daylight saving time. This option is only available if you selected SCW. 

Zone Location

This update allows you to assign zones an optional secondary name to give further clarification on the location of a zone. Zone Location provides the monitoring center additional support and promotes quicker response times from monitoring center operators and first responders. The secondary name is only visible to the monitoring center and does not display on the keypad. 

This option can be enabled in panel programming on the keypad or on Dealer Admin. To add a Zone Location to a zone, complete the following steps: 

  1. At the keypad, enter 6653 (PROG) and select CMD to enter the programming menu.
  2. In Zone Information, enter the Zone Number and Zone Name, then proceed to the next prompt.
  3. The Zone Location prompt appears after Zone Name. Press any select key or area and then enter up to 32 characters for the zone location. This prompt can also remain blank, and the zone name is sent to the Monitoring Center instead.
  4. Press CMD to continue. 

Sempro Communication 

Previously, systems without a programmed communication path could not send messages to SecureCom Wireless servers. Now, systems communicating with Dealer Admin send messages regardless if they have a communication path programmed, allowing for push notifications and analytics in Dealer Admin and Virtual Keypad.

Obtaining the New Firmware
XF6 firmware updates are available, free of charge, on Dealer Admin.

VERSION HISTORY

A State-of-the-Art Fire Control Panel

Advanced Fire Monitoring

Real-time alerts and accurate detection to ensure early response and minimize potential damage. Harness the power of Dealer Admin and Virtual Keypad to effortlessly unlock testing and programming capabilities at your fingertips.

Seamless Network & Cellular Integration

Facilitates easy integration into existing fire safety systems with its onboard Ethernet and cellular connections, allowing for centralized monitoring and control, saving time and resources.

Powerful Solution

Equipped with a 24V power supply, ensuring seamless operation for all your customers’ fire accessories. Additional 24V power supplies can be purchased for more options.

Rock Solid Reliability

The XF6 Series gives you affordable, commercial UL Listed wireless fire panels that can support up to 500 devices with the same quality you have come to expect. Including a proprietary wireless offering, the XF6 Series can support a wireless range up to 1.7 miles.

Inspection Reminder

The exclusive Inspection Reminder feature automates the panel’s inspection schedule and provides an audit report of when inspections are completed.

Two Options to Choose From

Both XF6 panels come fully assembled from the factory, complete with a user-friendly touchscreen annunciator, transformers and enclosure, making installation hassle-free and minimizing downtime.

XF6-100 Fire Control Panel

Designed for single-site applications and provides six onboard 24V Class B zones and one 12V 100 Zone LX-Bus for expansion.

XF6-500 Fire Control Panel

Designed for single-site applications and provides six onboard 24V Class B zones and five 12V 100 Zone LX-Buses for expansion.

“The XF6 panel has helped increase our arsenal of DMP products in all aspects of the industry that we serve. A versatile Fire Panel that delivers quality and functionality for integrators and end user.”

Joseph Glenn - Glenn Security

Visit buy.DMP.com to place an order 24 hours a day.